|
Pinellas Electric Motor Repair |
MX Series Submersible Mixer | |||
|
Applications Designed for a variety of commercial, industrial and Sewage System applications. Motor Specifications:
|
 Submersible Mixer ( Shown with Optional Stainless Steel Bracket) Pump Features: Propeller: 316 Stainless Steel nonfouling 2 blade design for maximum efficiency and durability. Mounting Bracket: Stainless Steel to fit 2" or 4" rail systems. Optional styles available to fit custom applications. Seals: Tandem Mechanical seal system in an oil filled seal chamber. Each seal operates independently to ensure fail safe performance. Standard seals are Carbon Ceramic inner and Silicon Carbide Outer Seal. Outer seal is designed for easy replacement. Optional seals are available. Seal Sensor Probes: Pump has a standard dual probe moisture detection system located in an oil filled seal chamber. The sensor leads must be connected to a " seal fail circuit" in the control panel. Motor Features: Standards: All motors have air filled stator housings and conform to the latest requirements of NEMA, IEEE, ANSI and NEC standards. Class F Insulation. Thermal Protection System: The motor is equipped with two Bi-metalic automatic reset on-winding thermostats to protect from thermal overload (Overloads must be wired to control circuit for proper operation). |
Operating Design: Motors
are designed for continuous submerged operation at a 1.15 service factor.. Bearings: Single row sealed ball bearings greased for life. Rated for minimum L10 life of 17,500 hours. The bearings are designed to carry all applicable radial and thrust loads. Cable Entry: Power and Control cables are epoxy encapsulated to prevent wicking even if the cable jacket is punctured. Buna-N grommets provide an additional cable seal. Shaft: 416 Stainless Steel. Power and Control Cables: Standard lengths are 25' or 50' with custom lengths available. The power leads are sized from 14/4 to 8/4 depending on HP and voltage, rated as SOW and SOOW. The control cable is 18/5 SOW cable. |
||